Use; First Use - Electrolux EWN 14991 K User Manual

Use

First Use

Ensure that the electrical and water
●
connections comply with the
installation instructions.
Remove the polystryrene block and
●
any material from the drum.
Run a cotton cycle at 90° or 95°C,
●
without any laundry in the machine,
to remove any manufacturing residue
from the drum and tub. Pour 1/2 a
measure of detergent into the main
wash compartment and start the
machine.
Setting the language
When switching on the appliance for
the first time, by turning the
programme selector dial (
set the desired language. When you
switch the appliance on again all
messages appear in this language.
Important!
If the display doesn't show any language,
the appliance has already been switched
on once. In such case, if you want to
change the language setting, press at the
same time the buttons
6 seconds to activate the menu language.
Press the buttons
to scroll all the available languages.
6
Press the button
choice.
Setting the time
After the desired language you must
set the time before the first wash.
Remember to change the setting time
in accordance with daylight-savings
time or solar time.
1
), you must
3 4
and for about
5
(Up or Down
twice to confirm your
The CLOCK setting permits you to
modify/set up the current time. It is
important to keep it updated as the
current END Cycle Time depends on it.
With a short/single time pressure of the
5
buttons , the time varies minute by
minute. With a continue pressure of the
same buttons, the time varies 10 minutes
by 10 minutes.
Press the button
Important!
If the appliance has already been switched
on once, press the buttons
the Options menu. By pressing again the
same buttons you can move through all
the available options till when you locate
the «Settings» menu. Press the button
to access in the menu. Press the buttons
5
to scroll all the settings till TIME
appears and press button
your choice and then set the clock.
Personalisation
Customize your appliance
This appliance is provided with a
«Settings» menu that allows you to
modify the factory settings as you
want.
When you switch the appliance on, by
turning the programme selector dial
)
1
( ), press the buttons
«Options» menu. By pressing again the
same buttons you can move through
all the available options till when you
locate the «Settings» menu. Press the
6
button to access in the menu. Press
again buttons
settings and press the button
confirm your choice.
use electrolux
6
to fix the current time.
5
to activate
6
to confirm
5
to activate the
5
to scroll all the
6
9
6
to