Installation - Electrolux EWN 14991 K User Manual

Installation

Unpacking
All transit bolts and packing must be
removed before using the appliance.
You are advised to keep all transit
devices so that they can be refitted if the
machine ever has to be transported
again.
1. After removing all the packaging,
carefully lay machine on it's back to
remove the polystyrene base from the
bottom.
2. Remove the power supply cable and
the draining hose from the hose
holders on the rear of the appliance.
3. With a suitable spanner unscrew and
remove the central rear bolt A.
4. Unscrew and remove the two large
rear bolts B and the six smaller bolts
C.
5. Remove the bracket D and tighten up
the six smaller bolts C. Slide out the
relevant plastic spacer E.
electrolux
installation 37