Before First Use; Daily Use - Electrolux EW7T3733BA User Manual

If the procedure does not work (due to
timeout, wrong programme dial position
or wrong keys combination), switch the
appliance off and repeat sequence from
the beginning.
9.4 Factory Reset
This function allows to restore the factory
default options. To activate this option follow
steps below:
1. Switch the appliance on by pressing
Marche/Arrêt button.
2. Turn the programme knob to the
Synthétiques programme (3rd position
clockwise).

10. BEFORE FIRST USE

1. Make sure that the electrical power is
available and the water tap is open.
2. Pour 2 litres of water into the detergent
compartment marked by
This action activates the drain system.
3. Pour a small quantity of detergent into the
compartment marked by

11. DAILY USE

WARNING!
Refer to Safety chapters.
11.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press button Marche/Arrêt to activate the
appliance.
A short tune sounds.
11.2 Loading the laundry
1. Open the appliance lid.
22 ENGLISH
3. Press and hold the Prélavage and
4. The display will show
If the procedure does not work (due to
timeout, wrong programme dial position
or wrong keys combination), switch the
appliance off and repeat sequence from
the beginning.
4. Set and start a programme for cotton at
This removes all possible dirt from the drum
.
and the tub.
.
2. Push the button A.
The drum opens automatically.
3. Put the laundry in the drum, one item at a
Taches buttons for some seconds (within
10 seconds after the switching on. After
these 10 seconds, the key combination
activates and deactivates the acoustic
signals).
seconds.
the highest temperature without any
laundry in the drum.
time.
for about 5
A