Electrolux EWN 14991 K User Manual page 13

cycle. When the machine performs the
washing phase the display shows also
some animated bubbles that simulate
the moving of the water. See the below
picture:
Delay
The selected delay time value (up to 20
hours max.) appears in the position 2.5
of the display (when the appliance start
operating) close to the relevant icon
that it is lighted-on.
The delay time value decreases every
minute.
Alarm codes
In the event of operating problems,
some alarm codes can be displayed,
for example «Cannot fill water. Please
check that the tap is open and then
press » (see the chapter What to do
if...»).
End of programme
When the programme has finished the
messages «Door Unlocked» and
«Finished» appear alternatively.
The door icon remains on to inform
that the wash cycle has finished and
the door can be opened.
Stand by mode
If your laundry is not removed during 10
minutes after the programme is finished,
the backlight of the display switches off
and the energy saving system will be
enabled.
Only the pilot light of the button
blinks to indicate that you must switch
the appliance off.
Press any buttons the appliance will
come out from the energy saving status
and you could set another washing
programme or switch the appliance off.
Programme Option buttons
Depending on the programme, different
functions can be combined. These must
be selected after choosing the desired
programme and before pressing the
button
Important!
For the compatibility among the
washing prgrammes and options, refer
to «Washing programmes».
Select the temperature (button 3)
Press the button
increase or decrease the temperature,
if you want your laundry to be washed
at a temperature different from the one
proposed by the washing machine
(position
Important!
To see the maximum and minimum
temperatures allowed for each washing
programmes, refer to «Washing
programmes».
Select the spin speed or No spin or
Night Cycle or Rinse Hold option
(button 4)
Press the button 4 repeatedly to
change the spin speed, if you want
your laundry to be spun at a speed
different from the one proposed by the
washing machine.
Important!
The maximum spin speed provided for
the selected washing programme
7
still
appears in the display (
No spin
use electrolux
7
.
3
repeatedly to
2.1
in the display).
= Cold Wash.
2.2
option eliminates all the
13
).