Installation - Electrolux EW 1548 F Installation And Instruction Manual

INSTALLATION
Unpacking
All transit bolts and packing must be removed
before using the machine.
You are advised to keep all packing for re-use in
case you move house and the machine has to be
transported again.
Proceed as follows:
Using a spanner remove the screw on the right at
the rear of the machine.
Carefully lay the machine on its back making sure
that the hoses are not squashed.
Remove the polystyrene panel from underneath the
machine.
There is no need to keep this panel.
Carefully remove the polythene bag (on the right)
by pulling it towards the centre of the machine.
The left polythene bag can now also be removed
from the machine.