Firmware Upgrade - Planet DMA-100 User Manual

SETP 3:
Using your remote control, press 2 to enter the Setup screen. You will then
see three tabs on the left side of the screen. Press the DOWN arrow twice to
move to Initial Setting.
SETP 4:
Press the RIGHT button once, and then DOWN button to select Firmware
Version, and then press the ENTER button.
After entering the Firmware version menu, you may now verify the current
installed firmware version in DMA-100.

Firmware Upgrade

In most circumstances, it is not required to perform firmware upgrade. In some spec-
tacular scenario, you might need to upgrade the firmware of the DMA-100 when there
is a patch firmware available from your local distributor.
SETP 1:
Before upgrading the firmware, the firmware file should be placed in the proper
folder in the DMA Media Server "Upgrade Bin file" menu.
37