Table of Contents
Advertisement
Digital Media Adapter User Guide
SETP 3:
Using your remote control, press 2 to enter the Setup screen. You will then
see three tabs on the left side of the screen. Press the DOWN arrow once to
change the TV out setting to PAL C/S Video, and then press the Enter but-
ton. .
Firmware Version
SETP 1:
Switch the TV into AV1 or AV2 mode, depending on how you have connected
the composite audio / video cable.
SETP 2:
You will then see the main menu with three options. The image below depicts
the main menu.
36
Advertisement
Table of Contents
