Planet DMA-100 User Manual page 12

One PC to Multiple TVs
After you have connected the composite audio / video cable from each DMA-100 to its
specified TV, connect all the straight RJ-45 cables to a Switch from the DMA-100s.
Then connect another straight RJ-45 cable from the Switch to your PC.
Follow the steps below for each DMA-100 so that each one has a separate IP address.
SETP 1:
Switch the TV into AV1 or AV2 mode, depending on how you have connected
the composite audio / video cable.
SETP 2:
You will then see the main menu with three options. The image below depicts
the main menu.
Installation
9