Planet DMA-100 User Manual page 15

Digital Media Adapter User Guide
SETP 8:
Press the ENTER button to save these settings. You will then return to the
previous menu. Press the Main Menu button to go the main menu. The DMA-
100 will then restart itself automatically.
SETP 9:
The configuration for this topology is completed. Now refer to Chapter 3 on
how to install the DMA Media Server into your PC.
In the first installation, it is suggested to locate
ë
Note
your PC in the same network segment (192.168.0.100) of
DMA-100/DMA-100W. If you're not familiar with TCP/IP,
please refer to related chapter on user's manual CD or
consult your network administrator for proper network
configurations.
Connect with USB Disk
After you have connected the composite audio / video cable to your TV, connect the
USB Disk to your DMA-100.
Follow the steps below to assign an IP address to the DMA-100.
SETP 1:
Switch the TV into AV1 or AV2 mode, depending on how you have connected
the composite audio / video cable.
SETP 2:
You will then see the main menu with three options. The image below depicts
the main menu.
12