Denon RCD-M35DAB Operating Instructions Manual page 18

Setting the Timer
The power can be set to turn on and off at a specific time or at the same time everyday, in any
modes: tuner, CD, cassette deck (optional) and timer recording (recording to the cassette deck
from the tuner or AUX input).
NOTE:
• Please do not change the setup function of this unit after performing the timer setup. In the
event the setup function is changed, the timer start mode may not start properly.
1, 19 3, 5, 7, 9, 11, 13, 15, 17
2, 4, 6, 8, 10, 12, 14, 16, 18
Example: Setting the tuner to turn on at 13:35, off at 13:56 (with FM 92.50 MHz preset at
channel 3) with everyday timer.
Press the power operation
1
switch to turn on the power.
Press the MENU/ SET button to
2
set the timer setting mode.
Press either the 9 or
8
button as desired.
3
Main unit
• The everyday timer is selected and "EVERYDAY"
appears in the display.
4 Press the MENU/ SET button.
9 8
Use the or
5 button to set the
"TUNER" mode.
Main unit
18
19
2, 4, 6,
8, 10, 12,
14, 16, 18
Say that FM 87.5 MHz is tuned
Main unit Remote control unit in preset channel number " 1 ".
Flashes
Main unit
Remote control unit
Flashes
Remote control unit
Main unit Remote control unit
Flashes
Remote control unit
6 Press the MENU/ SET button.
9
Use the
number.
7
1
8 Press the MENU/ SET button.
3, 5, 7,
9, 11, 13,
9
15, 17 Use the
9 button to set the hours
for the timer on time.
10
Press the MENU/ SET button.
Use the 9
button to
11
minutes for the timer on
time.
12 Press the MENU/ SET button.
9
Use the
13 button to set the hours
for the timer off time.
Press the MENU/ SET button.
14
Main unit Remote control unit
8
/ button to set the preset channel
Main unit Remote control unit
Main unit Remote control unit
8
or
Main unit Remote control unit
Main unit Remote control unit
or 8
set the
Main unit Remote control unit
Main unit Remote control unit
8
or
Main unit Remote control unit
Main unit Remote control unit
Flashes
Flashes
(If the timer has already been
set, that number flashes.)
Flashes
Flashes
(If the timer has already been
set, that number flashes.)
Flashes
Flashes
(If the timer has already been
set, that number flashes.)
Flashes
Flashes
(If the timer has already been
set, that number flashes.)