Denon DBP-2010 Owner's Manual page 42

ENGLISH
Function Setup
Setting items
DivX(R) VOD
Power Saving
Lower the power
consumption for standby
mode by denying the
command from RS-232C
during standby mode.
Remote Control Setting
Changes the signal code
of a remote control. (Refer
to page 6.)
HDMI CEC
Sets whether to utilise the
HDMI CEC function.
Remote control operation
buttons
Options Description
Registration Code This menu item provides you with
Your registration code is: ®
the DivX VOD registration code.
®
The DivX registration code is
To learn more visit required when downloading the
®
DivX VOD files from the Internet.
www.divx.com/vod
To learn more about DivX
visit www.divx.com/vod.
Deactivation Code This menu item provides you with
®
Your deactivation code is: the DivX VOD deactivation code.
®
The DivX deactivation code is
required when re-downloading
To learn more visit
®
the DivX VOD files from the
www.divx.com/vod
Internet after deactivating. To
learn more about DivX
www.divx.com/vod.
Deactivation Yes This menu deactivates the
®
No*
DivX VOD files and provides you
with new registration code and
deactivation code in order to
download the DivX
from the Internet.
On* On:
Off Denies the command from
RS-232C when the power is in
standby mode.
Off:
Accepts the command from
RS-232C when the power is in
standby mode.
DENON1*
DENON2
On*
Off
: Displaying the menu
Cancel the menu
Setting items
Media Select
Select the media to
playback.
®
VOD,
Network Connection
Refer to "Network
Connection" on page 38
for more details of each
setting.
®
VOD, visit
®
VOD files
Network Update
Refer to "Network
Update" on page 40 for
more detail.
: Move the cursor
(Up/Down/Left/Right)
37
ENGLISH
Options
Disc* Disc:
SD Card Select this when you play back a
disc.
SD Card:
Select this when you play back a
SD Memory Card.
Connection Test Perform the network connection
test to check if the network
settings are correctly made.
Enable(Easy)* Set all the network settings to the
default settings. (In most cases,
you can connect to the Internet
without making any changes to
the default settings.)
Enable(Custom) Set the network settings manually
in accordance with your network
environment, if necessary.
Disable Deactivate the network
connection.
Yes You can update the firmware
version by connecting this unit to
No*
the Internet.
: Confirm the setting : Return to previous menu
Function Setup
Description