Connections - Denon DBP-2010 Owner's Manual

Connections

Connect the DBP-2010 as follows before using. Make connections according to the equipment you are connecting.
Some DBP-2010 settings may be necessary depending on the connection method. Check each connection item for more information.
1
Home theater playback
- Playing back using multi-channel system
DBP-2010
ON / STANDBY
SD CARD
Multi-channel Audio + Video
• HDMI connection
"Connecting to a Display Device and an Amplifier/
Receiver with HDMI Cable" (page 11)
or
Multi-channel Audio
• Digital audio connection
"Digital Connection to an AV Amplifier with Built-in
Decoder" (page 13)
• Analogue 7.1 or 5.1ch connection
"Surround Connections to a Device with 7.1/5.1-channels
of Analogue Audio Inputs" (page 14)
Video
• Connecting to a TV
(VIDEO OUT/COMPONENT VIDEO OUT)
2
Playing back with a direct connection to a TV
DBP-2010
ON / STANDBY
Audio + Video
• Connecting to a Display Device with
HDMI Cable
Audio
• Connecting to a TV (2ch AUDIO OUT)
Video
• Connecting to a TV
(VIDEO OUT/COMPONENT VIDEO OUT)
3
Playing back 2-channel audio
• 2ch audio connection
: page 11
"Connection to a Device with 2-channels of Analogue
Audio Inputs" (page 14)
SD CARD
: page 11
or
: page 11
: page 11
DBP-2010
ON / STANDBY
SD CARD
10
ENGLISH
4
Using BD-Live function or updating the software
version of DBP-2010
ON / STANDBY
• LAN connection
"Network Connection with LAN" (page 15)
• Connecting the AC cord
ENGLISH
DBP-2010
SD CARD
: page 15