Connecting To A Tv; Connecting To A Display Device With Hdmi Cable; Connecting To A Display Device And An Amplifier/Receiver With Hdmi Cable - Denon DBP-2010 Owner's Manual

ENGLISH
Connections

Connecting to a TV

Make one of the following connections, depending on the capabilities of your existing device.
analogue audio
display device
AUDIO IN
R L
RCA
audio
cable
and
this unit
2ch AUDIO OUT
OOM TO ROOM
R L
FL C SL SBL
2ch AUDIO OUT
RS-232C R L
HT CABLE
MOTE CONTROL
FR SW SR SBR
7.1ch AUDIO OUT
2ch AUDIO OUT
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
• Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR,
pictures may be distorted due to the copy protection system.
• If the display device to which the player is to be connected is compatible with progressive scan
video, connect to the component video input.
• This unit's COMPONENT VIDEO OUT jacks are compatible for 480i/576i/480p/576p/720p/1080i
video resolution. If the connected display device is not compatible for 480p/576p/720p/1080i
video resolution, set "Component Output" to "480i/576i".
• If the picture is not output properly to the display device because of the "HDMI Video
Resolution" or "Component Output" setting, press and hold B on the front panel for more than
5 seconds. The "HDMI Video Resolution" setting will be reset to the default automatically.
• If you are using HDMI connection and set "HDMI Video Resolution" to "Source Direct", "1080p" or
"1080p24", picture may not be output properly to the display device. In that case, set "HDMI
Video Resolution" to "480i/576i", "480p/576p", "720p" or "1080i".
Method 1 Method 2
standard picture better picture
COMPONENT
VIDEO
VIDEO IN
IN
Y
P /C
B B
P R /C R
RCA video
cable component
or video cable
(Red)
Y B /C
VIDEO OUT
COMPONENT VIDEO OUT
VIDEO OUT COMPONENT VIDEO OUT

Connecting to a Display Device with HDMI Cable

Connecting this unit to device with an HDMI jack using an HDMI cable enables digital transfer of both
digital video signals and multi-channel audio signals.
After making the connection, please make HDMI settings on setup menu according to your display
device. Refer to pages 30-32.
Method 3
best audio and picture
display device
(Green)
A display device
with an HDMI
(Blue)
compatible port
(Red)
Cables not included.
Please purchase the necessary cables at your local store.
(Blue) (Green)
Use a cable on which the HDMI logo is indicated (a certified HDMI product) for connection to the
/C
HDMI connector.
Normal playback may not be possible when using a cable other than one on which the HDMI logo
is indicated (a non-HDMI-certified product).

Connecting to a Display Device and an Amplifier/Receiver with HDMI Cable

Connecting this unit to display device and an amplifier/receiver with an HDMI jack using HDMI cables
enables digital surround sound with high quality video.
Front Speaker (left)
display device
HDMI IN
HDMI cable
Surround Speaker (left)
Cables not included.
Please purchase the necessary cables at your local store.
11
ENGLISH
this unit
AC IN COAXIAL
DIGITAL OUT
COMPONENT VIDEO
( PCM / BITSTREAM )
ETHERNET HDMI OUT
To HDMI Input jack
HDMI cable
Centre Front Speaker (right)
Speaker
amplifier
HDMI IN
HDMI OUT
Surround Surround
back (For back (For
7.1-channel) 7.1-channel)
(left) (right)
Surround Speaker (right)
Connections
this unit
AC IN COAXIAL
DIGITAL OUT
( PCM / BITSTREAM ) COMPONENT VIDEO
ETHERNET HDMI OUT
HDMI cable
Subwoofer