Connection To A Device With 2-Channels Of Analogue Audio Inputs; Surround Connections To A Device With 7.1/5.1-Channels Of Analogue Audio Inputs - Denon DBP-2010 Owner's Manual

Connections
Audio signals output from DIGITAL OUT (COAXIAL)
When both HDMI and DIGITAL OUT is connected to other devices, the audio signals currently output
from the HDMI OUT will be output from the DIGITAL OUT jack as well, except that HDMI 2ch signal
will be output from HDMI OUT jack, when connected device does not support Dolby Digital and DTS.
< When HDMI is not connected or "Audio Mute" is selected···>
When HDMI is not connected or the "Audio Mute" is selected in "HDMI Audio Out" setting, the audio
signals output from DIGITAL OUT changes depending on the "Digital Out" setting. Refer to the
following table.
To set "Digital Out", press [SETUP], then select "Quick" A "HDMI Audio Out" A "Audio Mute" or
"Custom" A "Audio" A "HDMI Audio Out" A "Audio Mute".
Disc type Audio recording format
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
BD-Video
DTS
DTS-HD
PCM
Dolby Digital
DTS
DVD-Video
PCM
MPEG
DTS-CD
Dolby Digital
AVCHD
PCM
Dolby Digital
DivX ®
MP3/ MP2
audio CD/ MP3/ Windows Media™ Audio
• This table applies only when HDMI is not connected or the "Audio Mute" is selected in "HDMI Audio
Out" setting.
• If "BD Audio Mode" is set to "HD Audio Output" or the BD title does not have secondary or
interactive audio, the audio will be output as shown in the table.
• If the "BD Audio Mode" is set to "Mix Audio Output" and the BD title has secondary or interactive
audio, the audio will be output as follows:
* 1 Only the independent substream is decoded.
2
* Only the Dolby Digital substream is decoded.
3
* Only the core substream is decoded.
Note
• In order to output PCM signal from DIGITAL OUT jack while outputting the HDMI audio signal,
set "BD Audio Mode" to "Mix Audio Output" and set "HDMI Audio Out" to "HDMI Multi(LPCM)".
"Digital Out" setting
Bitstream LPCM
Dolby Digital 2ch Downmix PCM
Dolby Digital
2ch Downmix PCM*
Dolby Digital 2ch Downmix PCM*
DTS 2ch Downmix PCM
DTS
2ch Downmix PCM*
2ch Downmix PCM 2ch Downmix PCM
Dolby Digital 2ch Downmix PCM
DTS 2ch Downmix PCM
2ch PCM 2ch PCM
MPEG 2ch Downmix PCM
DTS 2ch Downmix PCM
Dolby Digital 2ch Downmix PCM
2ch Downmix PCM 2ch Downmix PCM
Dolby Digital 2ch Downmix PCM
2ch PCM 2ch PCM
2ch PCM 2ch PCM
Cables not included.
Please purchase the necessary cables at your local store.

Connection to a Device with 2-channels of Analogue Audio Inputs

audio
Stereo component
AUDIO IN
L
R
1
Supplied cables used in this connection are as follows:
2
• RCA audio cable (L/R) x 1
3
Note
• When connecting to a 2-channel audio stereo device, use the 2ch AUDIO OUT jacks. If the 7.1ch
AUDIO OUT jacks are used, set "7.1ch Audio Out" in the "Audio" menu to "2 Channel" (Refer to
page 33). For software recorded in multi-channel, analogue signals that have been down-mixed
into 2 channels are output. (For sources which are prohibited from down-mixing, only the FL/FR
signals are output.)

Surround Connections to a Device with 7.1/5.1-channels of Analogue Audio Inputs

Analogue 7.1ch/5.1ch audio signals can be output from 7.1ch AUDIO OUT jacks.
this unit
ROOM
FL C
2ch AUDIO OUT
R L
E
ONTROL
FR SW
7.1ch AUDIO OUT
14
ENGLISH
RCA audio cable
2ch AUDIO OUT
R L
AC IN COAXIAL
DIGITAL OUT
( PCM / BITSTREAM ) COMPONENT VIDEO OUT
ETHERNET HDMI OUT
AV amplifier
SL SBL
SR SBR
ENGLISH
Connections
this unit
FL C SL SBL
2ch AUDIO OUT
R L
FR SW SR SBR
7.1ch AUDIO OUT
audio
FRONT
L
R
CENTER
SUB-
WOOFER
SURROUND
L
R
SURROUND
BACK
L
R