Denon DBP-2010 Owner's Manual page 36

ENGLISH
Function Setup
Setting items
HDMI RGB Setting
Sets the digital RGB image range
(data range) output from the HDMI
OUT.
HDMI Auto Format
Makes the setting of the "Auto" for
"HDMI Video Resolution".
HDMI Video Resolution
Sets the HDMI video resolution.
HDMI Deep Color
Sets whether output the picture
from HDMI with the Deep Color or
not.
Component Output
Sets the video resolution for
component output.
Remote control operation
buttons
Options
Normal*:
Output as "16 (black)" to "235 (white)".
Enhanced:
Output as "0 (black)" to "255 (white)".
Depending on the display device you are using, the
black colours may seem to stand out when using HDMI
connections. If so, set to "Enhanced".
Max*:
The maximum resolution that can be input to the
connected HDMI device is detected and the HDMI
output resolution is selected automatically.
Panel:
The number of pixels of the connected HDMI device's
panel is detected and the HDMI output resolution is
selected automatically.
Auto*:
HDMI video resolution will be selected automatically
depending on the connected HDMI device and setting
of the "HDMI Auto Format".
Source Direct:
HDMI video resolution will be set to the recorded
resolution of a playback media.
480i/576i
480p/576p
720p
1080i
1080p
1080p24:
Gives a natural and high quality film reproduction of 24-
frame film material. The connected display device has to
be compatible with 1080p24 frame input.
Auto*:
The picture through the HDMI will be output with Deep
Color if the connecting device supports Deep Color.
Off:
The picture through the HDMI will be output without
Deep Color.
480i/576i*
480p/576p
720p
1080i
: Displaying the menu
Cancel the menu
Setting items
Progressive Mode
Sets the optimum progressive
mode for the image material
output from HDMI OUT jack and
COMPONENT VIDEO OUT jacks.
Audio/Video Sync
Sets which video signal to
synchronise the audio signal with.
Still Mode
Adjusts picture resolution and
quality in still mode.
TV Active Area
Sets the horizontal display area for
interlace (480i/576i) output.
: Move the cursor
: Confirm the setting
(Up/Down/Left/Right)
31
ENGLISH
Options
Auto*:
The progressive mode will be selected automatically
depending on the material type (film or video).
Video1:
Suited for playing video material discs.
Video2:
Suited for playing video material discs and 30-frame film
material discs.
HDMI*:
Synchronises the audio with the video signal from HDMI
OUT.
Progressive:
Synchronises the audio with the progressive video
signal from COMPONENT VIDEO OUT.
Interlace:
Synchronises the audio with the Interlace video signal
from COMPONENT VIDEO OUT (480i/576i) or VIDEO
OUT.
Other:
Select this when you want to view progressive,
interlaced and HDMI pictures simultaneously. The audio
signals are set to the optimum timing for the respective
pictures. (They are not synchronised.)
Auto*:
Automatically selects the best resolution setting
("Frame" or "Field") based on the data characteristics of
the pictures.
Field:
Stabilises the pictures, although the picture quality may
become coarse due to the limited amount of data.
Select "Field" when the pictures are still unstable even if
"Auto" is selected.
Frame:
Displays relatively motionless pictures in higher
resolution. "Frame" improves the picture quality,
although it may unstabilise the pictures due to alternate
output of 2-field data.
Normal:
Select this if the image is not stable with connecting to
professional-use display.
Full*:
Select this for connecting to commonly-marketed
display.
: Return to previous menu
Function Setup