Before Getting Started - Locosys GT-31 Owner's Manual

GT-31 is designed for easy operation. If this is your first time to own a GPS navigator, just follow the
instructions in the following pages and you will quickly get familiar with this unit.
.
Before Use
1) Charge the battery. It takes around 4 hours for the
built-in battery to be fully charged.
2) Initialize the receiver. Leave the GT-31outside with
a clear view of sky until it gets position fix. After
that, it needs only around 45 seconds to find its
location. When the unit has not been used for long
time or it's taken to a far distance from where you
initialized it, you will need to re-initialize the unit
before use.
3) Configure the system. Set up the parameters
under the [SETTINGS] page. The system will store
your configuration
4) Consult with your dealer or contact us. If you
have any question about setting up the
be pleased to assist you to get familiar with the unit.

Before Getting Started

in its built-in flash memory.
GT-31
5) Mark and edit waypoints, and create a route
(refer to [MARK], [WAYPOINT] and [ROUTE]
pages for details)
GT-31 can now tell you:
Where you are
Where you have been
Where you are going
How did you made up your trip, and
Many other interesting possibilities...
we will
8