Data Logger - Locosys GT-31 Owner's Manual

Page Tree
Interval
Min Speed
Save to Card
Clear

Data Logger

Select log time interval from 0 to 60 seconds.
"0" will disable data logger.
GT-31 has a built-in data logger up to 20480 points. You can either save the
logged data into SD cards or use NAVILINK Utility to download it to a host PC.
Set the minimum speed threshold value from 0 to 50
The speed unit is specified in [SETTINGS]/[UINT]
GT31 will only log points with speed above this value
Save the logged data to SD card (in SBP format)
The original SD logging operation will be stopped while copying the
logged data to SD card.
Clear logged data in flash memory
GT-31 logs data in cyclic mode. After filling memory, the oldest data is
overwritten by the new data.
39
/
Total points logged Maximum points
Points logged since power on (SBP)