Water Immersion - Locosys GT-31 Owner's Manual

Water Immersion

The GT31/BGT31 is designed to comply with IEC standard 60529 IPX7, which means that it can
withstand immersion in 1 meter of water for 30 minutes. Submersion for more than 30 minutes and/or
subjecting the unit to (dynamic) pressures higher than 1m of water may cause water entering and
damaging the unit. After submersion, be certain to wipe dry and air dry the unit thoroughly before
opening its SD card door. Since moisture condensation may occur inside the unit due to air
temperature differences inside and outside the unit, it is important to dry the unit in warm and dry
environment with the SD card door open after each use. This regular drying will prevent condensed
moisture from accumulating inside the unit. To minimize the possibility of internal condensation the SD
card door should only be opened in a dry environment.
72