Memory Card - Locosys GT-31 Owner's Manual

Page Tree
Log Switch
Min Speed
NMEA Items
File Size
When the card is
correctly inserted
Format Card
Remove Card

Memory Card

Insert SD/MMC card here properly and make sure
the compartment closed firmly
The system accepts SD or MMC cards up to 2GB.
When a memory card inserted, the screen will display CARD
FOUND message and proper card status icon will be displayed
in status bar. Refer to "Status Indicators" for details.
Set the log switch for memory card
OFF: disable card logging
ON: activate card logging, all points will be logged
ON-FIX: active card logging, only points with valid position
and speed above [MIN SPEED] is logged
Set the minimum speed threshold value from 0 to 50
The speed unit is specified in [SETTINGS]/[UINT]
GT-31 will only log points to memory with speed above this value
The minimum speed valid only if [LOG SWITCH] set to ON-FIX.
36