Download And Upload Data - Locosys GT-31 Owner's Manual

The data stored on the internal flash memory, including the routes, waypoints, track data and logger data can be
•
Saved to SD card and then read on PC/notebook directly from the SD card
•
Downloaded to a PC or Notebook via USB cable.
USB cable also enables upload of routes and waypoints edited on PC or Notebook to GT31.
Basic Operation of Downloading or Uploading
Make sure the USB driver has been successfully installed on your host.
Connect the USB data
Power on the unit, go to NAVILINK page, press in the
TS to enter NAVILINK mode
Execute the utility, NAVILINKII.exe on your host
You will see the screen on the right displayed.
In [Navi.Data] command page, you can select the items and
Click the command button to start upload or download.
When data transfer has been completed, press the
Power/ESC button to reset the unit.
How To: Download and Upload Data
via USB cable:
57