Connecting Players And Speakers; Connecting Recorders; Connecting The Power Supply Cord - Denon Professional DN-A200 Operating Instructions Manual

Connections

Connecting Players and Speakers

• Only Turntables fitted with a MM
(Moving Magnet) cartridge can be
used with this unit. If you have an
MC (Moving Coil) cartridge you
Turntable
will need to use a commercially
(MM cartridge)
available head amplifier or step-
up transformer.
• If humming or other noise is
generated when the ground wire
is connected, disconnect it.
L
AUDIO OUT
R AUDIO OUT
Ground wire
Speaker
(A)
L R L
> < > < >
GND
Power amplifier /
Subwoofer
L L
R R
DVD player
AUDIO OUT
L L
R R
Tuner
AUDIO OUT
L L
R R
CD player
AUDIO OUT
L L
R R

Connecting Recorders

Speaker
(B)
R
< > <

Connecting the power supply cord

L
AC OUTLETS
IN
AC 230V 50Hz
R
L
R
SWITCHED
TOTAL 100W (0.43A) MAX
L
R
L
R
5
ENGLISH
CD recorder /
Tape deck1
AUDIO IN
L L
R R
AUDIO OUT
L L
R R
MD recorder /
Tape deck2
AUDIO IN
L L
R R
AUDIO OUT
L L
R R
AC outlet
(wall)
Power supply cord
AC 230 V, 50 Hz
(Supplied)
Connecting to the AC OUTLET
• SWITCHED (Total capacity: 100 W (0.43 A):
The power supply to the outlets turns ON and
OFF with the main unit's POWER switch. Make
sure the total power consumption of the
connected devices does not exceed 100W.
NOTE:
• Only use the AC OUTLET for audio equipment.
Never use it for hair driers, TVs or other electrical
appliances.
• Insert the plugs securely. Incomplete connections
will result in the generation of noise.
ENGLISH
Connections
L
R
L
R
L
R
L
R