Connecting Players And Speakers; Connecting Recorders; Connecting The Power Cord - Denon DN-A300M Operating Instructions Manual

ENGLISH
Connections

Connecting Players and Speakers

• Only Turntables fitted with a
MM (Moving Magnet) cartridge
can be used with this unit. If
you have an MC (Moving Coil)
cartridge you will need to use a
commercially available head
amplifier or step-up transformer.
• If humming or other noise is
generated when the ground
wire is connected, disconnect it.
AUDIO OUT
Speaker
(A)
R L R
Ground wire

Connecting Recorders

Speaker
(B)
L

Connecting the power cord

5
ENGLISH
Connections
AC outlet
(wall)
Power cord
AC 120 V, 60 Hz
(included)
Connecting to the AC OUTLETS
• SWITCHED :
The power supplies from the SWITCHED outlets
turns on and off together with the main unit's
POWER switch.
• UNSWITCHED :
The power always supplies from the
UNSWITCHED outlet unless the power cord is
unplugged.
• Make sure the total power consumption of the
connected devices does not exceed 120W(1A).
NOTE:
• Only use the AC OUTLETS for audio equipment.
Never use it for hair driers, TVs or other electrical
appliances.
• Insert the plugs securely. Incomplete
connections will result in the generation of noise.