Operation; Preparations Prior To Playing; Starting Playback; Starting Recording - Denon Professional DN-A200 Operating Instructions Manual

ENGLISH

Operation

<LOUDNESS> <SOURCE DIRECT>
<SPEAKERS> VOLUME
POWER <TREBLE> <REC OUT SELECTOR>
<BASS> <BALANCE>
1
4
7
0
RANDOM
PHONO
INPUT SELECTOR
CD
VOLUME
TUNER
PRESET
A / B
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit

Preparations prior to playing

1
Set the volume to the minimum by using
2 < SOURCE DIRECT >
Set
3 < BASS >
Set
center position.
INPUT SELECTOR
4
Press
terminals to which speakers are connected.
POWER
POWER
5
Turn on the power by pressing
CD
2 3
• The power indicator blinks red for several seconds, then lights
5 6 green.
8 9
REPEAT

Starting playback

1
INPUT SELECTOR
TAPE-1 / CD-R TAPE-2 / MD
Use
TUNER DVD / AUX
played.
• Select one of the sources among the following: TAPE-2/MD,
MUTING
TAPE-1/CD-R, PHONO, CD, TUNER and DVD/AUX.
DISC
SKIP
• The input indicator for the selected source lights.
2
Play the selected source.
REC
DECK
3
Adjust the volume by using
RC-1022
4
Adjust
< BALANCE >
If there is no need to adjust the tone, press <SOURCE DIRECT>.
VOLUME
< LOUDNESS >
and to "OFF".
< TREBLE > < BALANCE >
, and
< SPEAKERS > A
B
or depending on the
POWER.
to select the source to be
VOLUME.
< BASS > < TREBLE >
the tone with ,
< LOUDNESS >.
and
6
ENGLISH

Starting recording

1 < REC OUT SELECTOR >
. Turn
recorded.
PHONO, CD, TUNER, DVD/AUX:
Select the device connected to the recording terminals to record.
2
Set the recorder to the record mode.
to the
3
Start playing the source to be recorded.

Copying cassette tapes

1 < REC OUT SELECTOR >
Turn
1
TAPE-2 1 1, TAPE-1 1 2:
Select this to record from tape deck 2 onto tape deck 1 (or from
tape deck 1 onto tape deck 2).
2
Set the device connected to the TAPE-2/MD (or
TAPE-1/CD-R) terminal to the record mode.
3
Start playback on the device connected to the TAPE-
1/CD-R (or TAPE-2/MD) terminal.
• The sound to be recorded can be heard by selecting the playback
source with INPUT SELECTOR, while the recorded sound can be heard
, by selecting the recorder.
• When performing these operations, also refer to the operating
instructions of the other devices.
NOTE:
• The sound may be interrupted or noise may be recorded if INPUT
SELECTOR is operated during recording.
to select the source to be
and select "TAPE-1
2" (or "TAPE-2