General Cleaning - Ducati MULTISTRADA 1100 S Use And Maintenance Manual

General cleaning

To preserve the original shine on metal surfaces and
paintwork, wash and clean your motorcycle at regular
intervals depending on the type of use and according
to the particular road conditions. Use specific products,
where possible biodegradable. Avoid aggressive
detergents or solvents.
E
Important
Do not wash your motorcycle immediately after use,
as marks can form due to evaporation of the water on
hot surfaces. Never clean the motorcycle using hot or
high-pressure water jets. Cleaning the motorcycle with
water cleaners may lead to seizure or severe failure of front
fork, wheel hub assembly, electric system, front fork seals,
air inlets or exhaust silencers and adversely affect the
operation of motorcycle safety features.
If parts of the engine are unusually dirty or greasy, use a
degreasing agent, avoiding contact with transmission
components (chain, front and rear sprockets, etc.). Rinse
with warm water and dry all surfaces with chamois leather.
82
Warning
There may be loss of braking efficiency immediately
after washing the motorcycle. Never grease or lubricate
the brake discs as this would cause loss of braking
effectiveness. Clean the discs with an oil-free solvent.