Passenger Seat Lock And Helmet Holder - Ducati MULTISTRADA 1100 S Use And Maintenance Manual

Passenger seat lock and helmet holder

(fig. 27)
Opening
Insert the key into the seat lock (1) and turn it clockwise
until the seat catch disengages with an audible click.
Lift the rear of the seat (2) and slide it backwards off the
front mountings.
E
Closing
Fit the seat over the tank mountings and pull it backwards
until it engages.
Press down on the rear of the seat until you hear the catch
engage with an audible click.
Make sure the seat is securely fitted by gently pulling on it in
an upward direction.
The hook for the helmet holder cable is located under the
passenger seat. Pass the cable (A) through the helmet and
fit the ends of the cable into the hook. Leave the helmet
hanging on the left side (fig. 28) and refit the seat to secure it.
Warning
This device protects the helmet against theft when the
motorcycle is parked. Do not leave the helmet attached in
this way when riding the motorcycle, as it can interfere with
your movements and cause loss of control of the motorcycle.
Hang the helmet cable from the left side of the motorcycle.
In any other position the cable will interfere with the seat
closure.
36
OPEN
1
fig. 27
A
fig. 28