Table of Contents
Advertisement
2) Check that the stop switch (1, fig. 40) is positioned
to
(RUN), then press the starter button (2).
This model has servo-assisted starting.
To use the servo-assisted starting feature, press the
start button (2) and release it immediately.
When you press the button (2) the starter motor
operates automatically for a maximum time determined
E
by the engine temperature.
The system disengages the starter motor as soon as the
engine starts.
If the engine fails to start, wait at least 2 seconds before
pressing the start button (2) again.
Allow the engine to start on its own, without turning the
throttle twistgrip.
Notes
If the battery is flat, the system automatically
disables operation of the starter motor.
Important
Do not rev the engine when cold. Allow some time for
the oil to warm up and reach all points that need lubricating.
50
1
2
fig. 40
Hide quick links:
Advertisement
Table of Contents
