Duplicate Keys - Ducati MULTISTRADA 1100 S Use And Maintenance Manual

Operation
When the ignition key is turned from ON to OFF, the
immobilizer system activates the engine lock. When
the ignition key is turned from OFF to ON (Key-ON) to
start the engine:
1) if the ECU recognises the code, the IMMO light
(3, fig. 5) on the instrument panel will flash briefly.
This means that the immobilizer system has
recognised the key code and enabled engine ignition.
When you press the
the engine will start up;
2) if the IMMO light stays on, it means that the code
has not been recognised. When this is the case, turn
the ignition key back to OFF and then to ON again.
If the engine still does not start, try with another
black key. If the engine still does not start, contact
the DUCATI Service network.
3) If the IMMO light keeps flashing, this means that an
error signal from the immobilizer system has been
cleared (e.g. with the override procedure using the
throttle twistgrip).
Important
Always use the same key throughout the procedure.
Otherwise, the system might be prevented from
recognizing the code of the key being used.
engine start button (2, fig. 19),

Duplicate keys

If you need duplicate keys, contact the DUCATI
Service network with all the keys you have left and
your CODE CARD.
DUCATI Service will program new keys and re-program
your original keys (up to a maximum of 8 keys)
DUCATI Service may ask for proof that you are the legitimate
owner of the motorcycle.
The codes for any keys not submitted during the
programming procedure are wiped from memory to
ensure that any keys that may have been lost can no
longer be used to start the engine.
Notes
If you sell your motorcycle, do not forget to give all
keys and the CODE CARD to the new owner.
E
25