Table of Contents
Advertisement
16 www.electrolux.com
REMOVING THE TRANSPORT SUPPORT
REAR SPACERS
LEVELLING
3
Your appliance is equipped with transport
support to secure the door during trans-
portation.
To remove them do these steps:
• Open the door.
• Remove the transport support from the
door sides.
• Remove the transport support from the
lower hinge (some models).
Some models are fitted with a si-
2
lencing pad under the cabinet. Do
not remove this pad.
• Install the spacers provided within the
accessory bag as shown in the figure.
• Install the spacers on the brackets of the
condenser (black grill) at the back of the
appliance.
When placing the appliance ensure that it
stands level. If necessary adjust the feet us-
ing the adjustment spanner supplied.
Advertisement
Table of Contents
