Technical Specification; Installation; Mains Cable; Unpacking - Electrolux ERC3709 Instruction Booklet

Hide thumbs Also See for ERC3709:
Table of Contents

Advertisement

Technical Specification

Model
Gross volume
Width
Height
Depth
Energy consumption
Energy class
Rated power

Installation

Mains Cable

Do not remove the power cord by pulling on its lead, particulary when the product is being pulled out of
its niche.
Damage to the cord may cause a short-circuit, fire and/or electric shock.
·
In the event of damage to the appliance's main cable, only an authorised service company recommended by
·
the manufacturer or a similarly qualified person may adjust it in order to avoid shock hazard for the user.

Unpacking

Unpack the appliance and check that it is in good
condition and free of any transport damage. Notify
the dealer immediately of any damage. Hand the
packaging over for recycling.
Do not allow children to play with the
packaging. The plastic film can cause
suffocation.

Removing the transport supports

Remove the tape and the transport supports from
the door sides
·
the shelves
·
Remove the transport support on the glass shelf by
pushing the support forward along the edge of the
shelf until it stops. Take hold of the rear edge of the
glass shelf and pull the shelf and transport support
forward until the shelf tilts and the transport support
can be removed. Some models are fitted with a
silencing pad under the cabinet. Do not remove this
pad.

Cleaning

Wash the inside of the appliance using lukewarm
water and bicarbonate of soda (5 ml to 0,5 litre of
water).
Do not use soap or detergent as the smell may
linger. Dry thoroughly.
ERC3709
370 l
595 mm
1800 mm
623 mm
179 kWh/year
A
70 W
10
Electrolux 818 21 42-03/7

Advertisement

Table of Contents
loading

Table of Contents