Getting The Best Results - Electrolux ergospace Instruction Manual

English

Getting the best results.

20 Accessories on board 3 in 1 multi tool nozzle to be found
in the back of the cleaner.
Use the nozzles as follows:
Carpets: * Use the carpet/hard floor nozzle with lever in position
(21). Reduce suction power for small carpets.
* On the Dust Magnet nozzle (23 and 24) there is normally
no need to switch mode. It can be used with brush up on all
surfaces for maximal convenience with maintained excellent
dust removal result. The brush setting should be used to reach
optimal dust removal even on difficult hard floors or to get a
combing effect on carpets.
Hard floors: * Use the carpet/hard floor nozzle with lever in
position (22).
Wooden floors: * Use the parquet nozzle (8).
Upholstery: Curtains, lightweight fabrics etc.: Use the upholstery
function of the 3 in 1 multi tool nozzle (5a). Reduce suction
power if necessary.
Frames, bookshelves, etc.: Use the dusting brush function of the 3
in 1 multi tool nozzle (5b).
* Use the easy clean kit (9).
Crevices, corners, etc.: Use the crevice function of 3 in 1 multi
tool nozzle (5c).
* Using the turbo nozzle (7)
Note: Do not use the turbo nozzle on skin rugs, rugs with long
fringes or a pile depth exceeding 15 mm. To avoid damaging
the carpet, do not keep the nozzle stationary whilst the brush is
rotating. Do not pass the nozzle across electric cables, and be
sure to switch off the vacuum cleaner immediately after use.
25 The dust bag must be replaced latest when the indicator
window is completely red. Read with the nozzle lifted up.
* Certain models only.
2193584-02Outline.indd 9
9
10/17/08 1:58:23 PM