Cleaning The Hose And Nozzle - Electrolux ergospace Instruction Manual

English

Cleaning the hose and nozzle

The vacuum cleaner stops automatically if the nozzle, tube,
hose or filters and s-bag ® becomes blocked. In such cases,
disconnect from mains and allow to cool for 20-30 minutes.
Clear blockage and/or replace filters and s-bag® and restart.
Tubes and hoses
35 Use a cleaning strip or similar to clear the tubes and hose.
(2) Hose handle could be dismantled from hose if cleaning
is needed.
36 It may also be possible to remove the obstruction in the
hose by squeezing it. However, be careful in case the
obstruction is caused by glass or needles caught inside
the hose.
Note: The warranty does not cover any damage to the hose
caused by cleaning it.
Cleaning the floor nozzle
37 To avoid deterioration of suction power, frequently clean
the carpet/ hard floor nozzle. The easiest way to clean it is
by using the hose handle.
Cleaning the turbo nozzle*
38 Disconnect the nozzle from the vacuum cleaner tube and
remove entangled threads, etc. by snipping them away
with scissors. Use the hose handle to clean the nozzle.
* Certain models only.
2193584-02Outline.indd 13
13
10/17/08 1:58:25 PM