ProForm 710 Ekg Exercise Bike User Manual page 11

5
Measure your heart rate if desired.
If there are sheets
of clear plastic on
the metal contacts
on the handgrip
pulse sensor,
remove the plas-
tic. Next, hold the
handgrip pulse sen-
sor with your palms
resting on the metal
contacts. Avoid
moving your
hands or gripping the contacts too tightly.
When your pulse is detected, a heart-shaped
symbol will flash in the display each time your
heart beats and then your heart rate will be
shown. For the most accurate heart rate reading,
hold the contacts for at least 15 seconds.
Contacts
6
When you are finished exercising, the console
will turn off automatically.
If the pedals do not move for a few seconds, the
time will begin to flash in the display and the con-
sole will pause. If the pedals do not move for a
few minutes and no buttons are pressed, the con-
sole will turn off and the display will be reset.
11