Delete Outside/Delete Inside - Xerox Color C75 Press User Manual

On: Select this option to have the Next Original option highlighted on the copy
screen when scanning is in process.
Off: Select this option to have the Last Original option highlighted on the copy
screen the scanning process is in process.
4. Select Save to save your choice.
This feature is available only when Collated is selected in the Copy Output screen.
5. Close the document feeder.
6. Program the job with the desired features/options, including:
Reduce/Enlarge
Paper Supply
Output Color
Copy Output
2-Sided Copying
Original Type
Lighten/Darken
7. Enter the quantity.
8. Press Start.
9. When you are finished scanning all the documents, select Last Original to complete
the job.
10. Retrieve the copies from the output area.

Delete Outside/Delete Inside

This feature allows you to specify the area for omission or deletion and then to copy
that area. Keep the following in mind when using this feature:
When specifying multiple areas to delete, it is also possible to overlap and specify an
area.
When selecting Reduce/Enlarge, the areas are reduced or enlarged by interlocking
magnification.
1. Press the Services button on the control panel.
By default, pressing the Services button will cause the Copy screen to appear.
2. Select the Job Assembly tab.
3. Select Delete Outside/Delete Inside.
The Delete Outside/Delete Inside screen is displayed. By default, Off is selected.
4. Select either Delete Outside or Delete Inside.
5. If the originals are 2-sided, select the applicable option:
Both Sides
Side 1 Only
Side 2 Only
6. Select the Area 1 button.
Xerox Color C75 Press
®
User Guide
Copy
5-31