Internet Connection - ZyXEL Communications SBG3300 series User Manual

Internet Connection

A typical Internet access application of the SBG3300 is shown below. For a small
office, some components need to be checked before accessing the Internet.

Before we begin.
The device is shipped with the following factory defaults:
1. IP address = 192.168.1.1, subnet mask = 255.255.255.0 (24 bits).
2. DHCP server enabled with IP pool starting from 192.168.1.33.
3. Default user's username/password = user/1234.

Setting up the PC (Windows OS).
1. Ethernet Connection

All PCs must have an Ethernet adapter card installed.
2. TCP/IP Installation
You must first install the TCP/IP software on each PC before you can use it for the
Internet access. If you have already installed the TCP/IP protocol, go to the next
section to configure it; otherwise, follow these steps to install:

In the Control Panel/Network

In the Select Network Component Type
Add.
window, click Add button.
windows, select Protocol and click