How Do I Use The Reset Button, And What Parameters Will Be Reset By The Reset Button; What Network Interfaces Does The New Device Series Support; How Does The Device Support Tftp; Can The Device Support Tftp Over Wan - ZyXEL Communications SBG3300 series User Manual

How do I use the reset button, and what parameters
will be reset by the reset button?
You can use a blunt pointed object (e.g. paperclip) and insert it into the little reset
button hole beside the power connector. Press down the reset button and hold
down for approx. 5 seconds, the unit will be reset. When the reset button is
pressed, all the device parameters will be reset back to factory defaults, including
password and IP address.
The default IP address is 192.168.1.1, default password is 1234.
What network interfaces does the new device series
support?
The new device series supports auto MDI/MDIX 10/100M Ethernet LAN port to
connect to the computer or Switch on LAN.

How does the device support TFTP?

In addition to the direct console port connection, the device supports uploading and
download of the firmware and configuration file using TFTP (Trivial File Transfer
Protocol) over LAN.

Can the device support TFTP over WAN?

Although TFTP should work over WAN as well, it is not recommended because of the
potential data corruption problems.

When do I need NAT?

a. Make local server accessible from outside Internet