ZyXEL Communications SBG3300 series User Manual page 10


In the Select Network Protocol
manufacturers, then select
3. TCP/IP Configuration
Follow these steps to configure Windows TCP/IP:

In the Control Panel/Network
click Properties

In the TCP/IP
Note: Do not assign any arbitrary IP address and subnet mask to your PCs; otherwise,
you will not be able to access the Internet.

Click the WINS

Click the Gateway
button until there are none listed.

Click the DNS Configuration

Click OK to save and close the

Click OK to close the Network window. You will be prompted to insert your
Windows CD or disk. When the drivers are updated, you will be asked if you
want to restart the PC. Make sure that your Device is powered on before
answering "Yes" to the prompt. Repeat the aforementioned steps for each
Windows PC on your network.
TCP/IP
window, click the
button.
Properties window, select
configuration tab and select
tab. Highlight any installed gateways and click the
tab and select
TCP/IP
windows, select Microsoft
from the Network Protocols
TCP/IP
obtain an IP address
Disable WINS Resolution.
Disable DNS.
properties window.
from the list of
and click OK.
entry to select it and
automatically.
Remove