Privilege Level - ZyXEL Communications MGS3600-24F User Manual

F M
RONT ATTER

6.4.2 Privilege Level

This screen provides an overview of the privilege levels of each group.
To configure group privilege levels:
1. Click System > Account
2. Use the drop-down boxes under the
3. Click Save.
Parameter description
Group Name:

This column lists privilege level groups. Most privilege level groups consist of a single module (e.g. LACP, RSTP or QoS), but the following
groups contain more than one module.
System: Contact, Name, Location, Timezone, Log.

Security: Authentication, System Access Management, Port (802.1x port, MAC based and the MAC Address Limit), ACL, HTTPS, SSH,

ARP Inspection and IP source guard.
IP: Everything except ping.

Port: Everything except VeriPHY.

Diagnostics: Ping and VeriPHY.

Maintenance:

CLI:- System Reboot, System Restore Default, System Password, Configuration Save, Configuration Load and Firmware Load.

Web:- Users, Privilege Levels and everything in Maintenance.

Debug: Only present in the CLI.

Privilege Levels:

Use these fields to configure the authorization privilege level of each group. Every group has an authorization privilege level for the following
sub groups: configuration read-only, configuration/execute read-write, status/statistics read-only, status/statistics read-write (e.g. for clearing
of statistics). The user's privilege must be the same or greater than the authorization privilege level to have access to that group.
MGS3600-24F/XGS3600-26F/XGS3600-28F
> Privilege Level. The Privilege Level
Privilege Levels
screen appears.
column to configure the privilege level of each group.
6-16 U ' G
SER S UIDE