Port Scheduler And Port Shaping; Queue Shaper; Queue Scheduler - ZyXEL Communications MGS3600-24F User Manual

F M
RONT ATTER

7.14.4 Port Scheduler and Port Shaping

Use the Port Scheduler and
To configure QoS port scheduling and shaping:
1. Click Configuration >
2. Click the port number to configure the schedulers. The
3. Configure the parameters.
4. Click Save.
Parameter description
Scheduler Mode:

Use this drop-down box to configure the scheduler mode to

Queue Shaper

Enable:

Check these check boxes to enable queue shapers on this port.
Rate and Unit:

Use these fields and drop-down boxes to limit the data rate (default is 500) for this queue. This value is restricted to 100 to 1000000 kbps or
1 to 13200 Mbps.
Excess:

Check this check box to allow the queue to use excess bandwidth.

Queue Scheduler

These parameters appear when
Weight:

Use this field to configure the weight (default is 17) for this queue. This value is restricted to 1 to 100.
MGS3600-24F/XGS3600-26F/XGS3600-28F
Port Shaping sub-menus to configure QoS egress port schedulers and shapers for all switch ports.
QoS > Port Scheduler or Port
Scheduler Mode is Weighted.
Shaping.
QoS Egress Port Schedulers and Shapers
Strict Priority or Weighted
7-102
page appears.
for this port.
U ' G
SER S UIDE