Table of Contents
Advertisement
the series of beeps will end, and the computer will automatically turn off.
Remove the disc from the optical drive before the computer completely turns
off.
10. Repeat steps 2 through 4.
11. Move the jumper back to the standard position (pin 1 and pin 2).
12. Reconnect any cables that were disconnected. Then, reinstall the computer
cover and reconnect the power cords for the computer and monitor to
electrical outlets. Refer to "Completing the parts replacement" on page 35.
13. Turn on the computer to restart the operating system.
Chapter 5. Updating system programs
55
Advertisement
Table of Contents
