Table of Contents
Advertisement
2. Repeatedly press and release the F12 key when turning on the computer. When
3. Select the desired startup device from the Startup Device Menu and press
Note: Selecting a startup device from the Startup Device Menu does not
Selecting or changing the startup device sequence
This section provides instructions on how to view or permanently change the
configured startup device sequence.
To view or permanently change the configured startup device sequence, do the
following:
1. Start the Setup Utility program. See "Starting the Setup Utility program" on
2. Select Startup → Primary Boot Sequence. Read the information displayed on
3. Select the first boot device, second boot device, and so on.
4. Press Esc to return to the Startup menu. Then, select the devices for the
5. Press Esc to return to the Setup Utility program main menu. You might have to
6. Press F10 to save and exit the Setup Utility program.
Exiting from the Setup Utility program
After you finish viewing or changing settings, press Esc to return to the Setup
Utility program main menu. You might have to press Esc several times. Then, do
one of the following:
v If you want to save the new settings, press F10 to save and exit the Setup Utility
v If you do not want to save the settings, select Exit → Discard Changes and Exit.
v If you have changed the settings and want to return to the default settings,
52
User Guide
the Startup Device Menu opens, release the F12 key.
Enter to begin.
permanently change the startup sequence.
page 49.
the right side of the screen.
Automatic Boot Sequence and Error Boot Sequence.
press Esc several times.
Notes:
a. If you do not want to save the settings, select Exit → Discard Changes and
Exit.
b. If you have changed the settings and want to return to the default settings,
select Exit → Load Optimal Defaults or press F9.
program. Otherwise, your changes will not be saved.
select Exit → Load Optimal Defaults or press F9.
Advertisement
Table of Contents
