Table of Contents
Advertisement
2. Lay the computer on its side for easier access to the system board.
3. Locate the memory slots on the system board. See "Locating parts on the
system board" on page 10.
4. Remove any parts and disconnect any cables that might prevent your access to
the memory slots.
5. If you are replacing a memory module, open the retaining clips and remove the
old memory module that is currently installed. If you are installing a memory
module, go to step 6.
Figure 12. Removing the memory module
6. Open the retaining clips of the memory slot in which you want to install the
new memory module.
Figure 13. Opening the retaining clips of the memory slot
Chapter 2. Installing or replacing hardware
21
Advertisement
Table of Contents
