Getting To Know The Goflex Satellite™ Device - Seagate GoFlex Satellite User Manual

1. Introduction
Getting to Know the GoFlex Satellite™ Device
Power Button
Figure 1: GoFlex Satellite Device
• Power button: Press to turn on the GoFlex Satellite device. If a problem occurs with your
GoFlex Satellite, press and hold the button for 15 seconds to reset the device.
The lights on the GoFlex Satellite device change color and flash to indicate the status of the
drive's power, battery charge and Wi-Fi status.
• Wi-Fi LED: Indicates the GoFlex Satellite device's wireless broadcasting state.
• Green blink: GoFlex Satellite device is starting up.
• Green solid: GoFlex Satellite device is started.
• Blue blink: GoFlex Satellite device is ready to be accessed wirelessly and/or
broadcasting.
• Power LED:
• Green solid: Fully charged or at least 50 minutes of battery life remaining.
• Amber: Charging.
• Red: Battery is low. Requires a charge. See "Charging the Battery" on page 10.
• USM™ (Universal Storage Module) SATA Connector: Connects GoFlex Satellite to the
supplied USB 3.0 adapter/cable and to your computer.
• DC Power Connector: Connects GoFlex Satellite to the USB to DC power cable.
GoFlex Satellite™ User Guide
USM SATA Connector
Wi-Fi LED
Getting to Know the GoFlex Satellite™ Device
DC Power Connector
Power LED
3