Seagate GoFlex Satellite User Manual page 12

1. Introduction
Factory Defaults Button
Figure 2: Factory Defaults Button
• Factory Defaults button: Press and release this button, located on the bottom of the
device, to reset GoFlex Satellite to its original factory settings (normally not necessary—
see "Restoring GoFlex Satellite™ to its Original Settings" on page 29 for more
information). No data is lost during this process.
Activity Lights
Figure 3: USB 3.0 Adapter Activity Lights
The USB 3.0 adapter activity lights illuminate when the GoFlex Satellite device is connected
to your computer along with the detachable USB 3.0 cable. The lights blink when you are
copying files to and from the GoFlex Satellite drive, and turn off when it is safe to disconnect
GoFlex Satellite from your computer.
• Adapter cable activity lights:
• White steady: GoFlex drive is connected to your computer and ready for use.
• White blink: Activity.
GoFlex Satellite™ User Guide
Getting to Know the GoFlex Satellite™ Device
4