Disconnecting From The Goflex Satellite™ Signal; Setting A Password; Resetting The Goflex Satellite™ Device; Managing The Goflex Satellite™ Device - Seagate GoFlex Satellite User Manual

4. Managing the GoFlex Satellite™ Device
Disconnecting From the GoFlex Satellite™ Signal
The GoFlex Satellite device can be accessed by three different devices at once. If a fourth
device attempts to connect, it is blocked. The user will see a message that their device is
unable to join the "GoFlex Satellite" network.
To allow a blocked device access to GoFlex Satellite, one user must disconnect from its
wireless network.
1. Open your media device's list of wireless networks.
2. Choose a wireless network other than GoFlex Satellite.

Setting a Password

Create a password if you want to restrict access to your GoFlex Satellite device. You may
want to set a password if you're in an environment where you don't want others to connect to
your GoFlex Satellite device. Setting a password turns WPA security on, which protects your
wireless transmissions with GoFlex Satellite. To stop requiring a password after one has been
created, select Turn Password Off and then enter the current password.
3. From the GoFlex Media app or if you are using a browser, select Settings.
1. Select Turn Password On.
2. Type your password and then click Next.
3. Type the password once more to confirm the change.
The password must be at least eight characters long and no more than 64 characters. All
ASCII characters are acceptable. Most of these characters are available on your device's
keyboard.
Resetting the GoFlex Satellite™ Device
If GoFlex Satellite isn't working right, try resetting the device by pressing and holding the
Power button for 15 seconds. This turns off the LEDs, and then shuts down and restarts the
device.
Managing the GoFlex Satellite™ Device
This section provides instructions for managing the content on the GoFlex Satellite device,
and using the drive utilities available with the optional Seagate Media Sync™ software.

Deleting Content From GoFlex Satellite™

To delete content from the GoFlex Satellite drive, connect GoFlex Satellite to your computer
using the USB 3.0 adapter and cable to GoFlex Satellite and to your computer. Browse the
drive's folders and then delete files as you normally would.
GoFlex Satellite™ User Guide
Managing the GoFlex Satellite™ Device
31