Getting To Know Goflex Satellite - Seagate GoFlex Satellite User Manual

1. Introduction

Getting to Know GoFlex Satellite

Power/Reset Button
Figure 1: GoFlex Satellite Device
• Power/Reset button: Press to turn on the GoFlex Satellite device. If a problem occurs
with your GoFlex Satellite, press and hold the button for 15 seconds to reset the device.
• WiFi LED: Indicates GoFlex Satellite's wireless broadcasting state.
• Green blink: GoFlex Satellite is starting up.
• Blue blink: GoFlex Satellite is broadcasting and ready to be accessed wirelessly.
• Red: TBA
• Power LED:
• Green solid: Fully charged or at least 50 minutes of battery life remaining.
• Amber: Charging.
• Red: Requires a charge. See "Charging the Battery" on page 14.
• SATA Connector: Connects GoFlex Satellite to the supplied USB 3.0 adapter/cable and
to your computer.
• Power Connector: Connects GoFlex Satellite to the USB to DC power cable.
GoFlex Satellite™ User Guide
SATA Connector
WiFi LED
Getting to Know GoFlex Satellite
Power Connector
Power LED
7