Connecting To The Goflex Satellite™ Wireless Signal; Connecting To The Goflex Satellite™ Signal From An Ios Device - Seagate GoFlex Satellite User Manual

Hide thumbs Also See for GoFlex Satellite:
Table of Contents

Advertisement

3. Using the GoFlex Satellite™ Device
The battery inside GoFlex Satellite is partially charged at the factory; the power LED is green
when the battery is fully charged. The battery possesses a sufficient charge to complete the
setup process and to copy content to the drive.
If the power LED is red, GoFlex Satellite has a maximum of 50 minutes of battery life. If you
plan to use the device right away, it is recommended that you charge the drive until the power
LED turns green. See "Charging the Battery" on page 10.
To power off GoFlex Satellite:
Press and release the Power button. The Wi-Fi LED turns off, followed by the power LED. If
the drive is in use, it will take a little longer for the GoFlex Satellite device to power off
completely.
Connecting to the GoFlex Satellite™ Wireless Signal
GoFlex Satellite is its own wireless network. When you connect to it, your device will no
longer be connected to the Internet, as it establishes a dedicated link with GoFlex Satellite
over Wi-Fi. If you want to connect to the Internet again, you must actively connect to the other
network, thus disconnecting from GoFlex Satellite. GoFlex Satellite supports up to three
users at a time.
Connecting to the GoFlex Satellite™ Signal from an iOS Device
Apple iOS devices can use the GoFlex Media app, which allows you to easily find and play
your content stored on the GoFlex Satellite drive. The GoFlex Media app, which you can get
free from the App Store, can be used with an iPad, iPhone or iPod touch. Make sure to install
the app before continuing. See "Step 3: Installing the GoFlex Media™ app" on page 10.
1.
Turn on the GoFlex Satellite device by pressing the power button. Wait for the Wi-Fi LED to
blink blue, indicating it is ready to be accessed wirelessly.
2.
On your iOS device (iPad, iPhone or iPod touch), tap Settings > Wi-Fi.
GoFlex Satellite™ User Guide
Connecting to the GoFlex Satellite™ Wireless Signal
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents