Advanced Setup - Carrier P/N 33CSSN2-MH Owner's Manual

I

Advanced Setup

Note: Set the thermostat to 'OFF' mode before adjusting settings.
Press the Fan button
Press
for 5 seconds to enter
FAN
these Setup screens.
Adjust the default
temperature when the
unit is powered up or
turned on.
(60 - 85)
Default = 72 degrees
Adjust the minimum
temperature limit.
(60 - 85)
Default = 67 degrees
Adjust the maximum
temperature limit.
(60 - 85)
Default = 80 degrees
Note: The user may select any desired temperature
between 60 and 85 degrees. However, the thermostat
will not attempt to cool or heat the room beyond the
minimum or maximum setpoint limits.
Adjusting Setpoint Limits
NOTE: Each step's description is
located at
corner of the
easy reference.
72
SETPOINT
TO SET PRESS, OR
67
MIN SETPOINT
TO SET PRESS, OR
80
MAX SETPOINT
TO SET PRESS, OR
Page 5
the top right
display for
Press
FAN
Press
FAN
To exit setup
screens:
Press
F / C