Carrier P/N 33CSSN2-MH Owner's Manual page 8

II
Advanced Setup
Continued from prior page.
Adjust the maximum
temperature setpoint
that is used when the
thermostat indicates OFF.
Cooling will come on when
the temperature rises
above this setpoint.
Default = 85 degrees
Adjust the length of time
the fan will continue to
run after the temperature
is satisfied. (To purge
the system)
(0-90 seconds, in 15
second increments)
Default = 30 seconds
Select the type of equipment
this thermostat is connected
to, from the table on the
next page.
This feature prevents rooms from getting to hot or too cold
when heating or cooling is turned off.
(continued)
INSTALLATION
85
OFF MAX SETPOINT
TO SET PRESS, OR
30
FAN PURGE
TO SET PRESS, OR
i
EQUIPMENT TYPE #
TO SET PRESS, OR
Page 7
Press
FAN
Press
FAN
To exit setup
screens:
Press
F / C