Advanced Setup - Carrier Debonair 2 Owner's Manual

Advanced Setup

MODE FAN
Display On
Select Display operation:
On = Full Display
Off = Minimal Display
Display Off
Select Display operation:
1 = Single Setpoint
2 = Dual Setpoint
Note: When Single Setpoint is selected, the heating or cooling
setpoint will always be displayed. To display the room temperature,
press and hold the MODE button for two seconds. The degree icon
will blink when the large number is displaying room temperature
and will remain solid when displaying the heating or cooling
setpoint.
Press the MODE and FAN
buttons at the same time
for 10 seconds to enter
Advanced Setup screens.
See page 20
See page 24
NOTE: Each step # is located
at the top right corner of the
display for easy reference.
10
Setup
ON
MODE
Setup
MODE
Continued
Press
Press