Table of Contents
Advertisement
Trouble Shooting
If you have trouble operating your MSC camera, refer to the following table. Should these
guidelines not enable you to solve the problem, contact your distributor or an authorised
technician.
Nothing appears on the monitor.
•
Check the power connections and that the polarity is correct.
Check the VIDEO signal line connection.
•
The image on the monitor is not clear.
•
Make sure the lens is clean. Clean the lens glass with a soft clean lint free cloth.
•
Adjust the monitor contrast & brightness controls.
•
Re-position the camera if necessary.
The image on the monitor is too dark.
•
Adjust the contrast control of the monitor.
If there is an intermediate device, set the 75Ω / Hi-z correctly.
•
The camera isn't working properly, or the surface of the camera is very hot.
•
Check that an appropriate power source is connected to the camera. It must be a
regulated DC12V power source, for example the Genie PSU1SM.
Genie CCTV Limited
7
MSC
Version 2.1
Advertisement
Table of Contents
